New Aftermarket Trucks Parts Counter | Street Trucks

New Aftermarket Trucks Parts Counter, The right hardware for your hauler!

FIRST UP ON THE PARTS COUNTER IS AMERICAN CHASSIS 

All American Chassis is now offering chassis for 1955-’59 GM trucks for customers who want to run coilovers or airbags. All chassis are fabricated and boxed using 3/16-inch steel.

The airbag chassis will lay out on a 32-inch-tall tire at the rear, 30 inches for the front. Front wheels can either be 8.5 inches wide with a 5.750-inch backspacing or 9 inches wide with a 6-inch backspacing. It has a 6-inch ride height and lays true frame rail. It also has a 60-inch hub mounting face to hub mounting face (track width).

Chassis includes front crossmember with fabricated control arms (optional billet arms), four-link, Watt’s link, an adjustable transmission crossmember, front and rear sway bar tubs, engine mounts, inner structure and a stainless-steel tie rod kit. Uses either manual or powered rack-and-pinion (sold separately). Many other options are available. Made in the U.S.A.

All American Chassis
844-245-5381
www.allamericanbillet.com

NEXT PPE Parts for ’14+Durangos

PPE Power has engineered an exclusive removable and replaceable fluid filter and permanent replacement pan made from cast aluminum. This eliminates the high cost of regularly replacing the factory pan. Now simply remove, replace filter and reinstall.

Holding 1.5 quarts of extra fluid, the high-strength aluminum features external cooling fins for optimal heat dissipation. Cooler fluid lubricates better, which helps increase transmission service life and reduce service costs. Available for 2014 and older Dodge Durangos with 3.6L V-6 with 845RE/850RE transmission or 5.7L V-8, 6.4L V-8 with 8HP70/8HP75 transmission.

PPE Power
714-985-4825
www.ppepower.com

features:

• Cast-aluminum construction
• Increased heat dissipation
• External cooling fins reduce oil temps
• 1.5 quarts of increased fluid capacity
• Includes replaceable filter
• Neodymium magnet equipped billet stainless pulls harmful ferrous metal contaminants from the fluid
• 1/8-inch NPT temperature probe access port
• Limited lifetime warranty

Pipe & Boot Kit

Adding a tune and more boost is a great way to squeeze more power from the 2019 and older Ford Ranger, but the stock intercooler pipes can only handle so much boost. That’s why Mishimoto has developed this aluminum intercooler pipe and boot kit for the ’19+ Ford Ranger 2.3L EcoBoost.

Mishimoto
1-877-GOMISHI
www.mishimoto.com

Nice Shift!

American Powertrain saw the need for a five-speed designed from the ground up for serious performance and better fit in classic muscle cars, hot rods and trucks. Thus, the Tremec TKX was born.

The TKX is rated to handle up to 600 lb-ft of torque and 8,000 rpm. You can even bang gears at 7,500 rpm and the TKX won’t miss a beat. The all-new aluminum case is a three-piece design (main case, intermediate plate and rear extension) that is strong and compact enough to clear most transmission tunnels without floor pan modifications. Tremec even provides three shifter locations to help you place the shifter just where you want it.

The American Powertrain Tremec TKX five-speed transmission is available in several gear ratio configurations for GM and Ford:

American Powertrain
931-646-4836
www.americanpowertrain.com

features:

• High-grade steel gears and shafts to handle large amounts of engine torque
• All gears supported by caged needle bearings to reduce endplay
• Gear layout minimizes noise, vibration and harshness
• Wide gears for durability and higher torque capacity
• Gaskets at all flanges eliminate fluid leaks
• Multi-cone synchronizers and hybrid sintered bronze/carbon synchronizer rings for smoother shifts
• Short-throw billet aluminum shifter isolates road noise while providing clean, crisp shifts
• 26-spline input and 31-spline output shafts for added strength (Ford also available with 10-spline input shaft)
• Built-in reverse light switch and cruise control safety switch

“GMC” Horn Button

Auto Metal Direct has metal and so much more. The company’s newest development shows the GMC folks a little love. This reproduction center steering wheel horn button with GMC logo is for the ’78-’91 GMC C/K Squarebody Pickup, Jimmy and Suburban. Made like OE on all new tooling, each piece is manufactured in injection molded plastic and features the correct leather grain vinyl covering and red GMC letters on black backing with brushed aluminum accents, like the original.

This officially GM licensed restoration
part replaces GM part
#3761176, 17987490

Auto Metal Direct
877-575-3586
www.autometaldirect.com

Honda Pilot Lift Kit

ReadyLIFT is excited to offer 2016-’20 Honda Pilot AWD owners a great lift solution. This all-new kit is designed to improve the ground and tire clearance of Honda’s popular mid-size CUV. Using our very popular and easy-to-install application specific offset spacer design, this new Honda Pilot lift kit provides 2.5 inches of front lift and 2 inches of rear lift.

Honda was gracious enough to make the fender well opening noticeably larger on the Honda Pilot and ReadyLIFT found that you can fit up to a 265/60R18 tire on a 18×9 +35 offset wheel that fits comfortably with no rubbing issues.

ReadyLIFT Suspension Inc.
800-549-4620
www.readylift.com

White Rock Light Kit

Now available with an MSRP of $99.95, these new highly durable and intensely bright white LED rock lights easily install for applications on trucks, Jeeps, trailers, powersport vehicles and more.

“Featuring more than 2,400 lumens of output, making them brighter than most headlights, you can drive with confidence using these white rock lights with high quality components that withstand any terrain you put them through on the streets or off-road,” says Justin Hartenstein, Oracle Lighting director of development. “With multiple options on the market, you want the best quality for a good price when choosing white rock lights.”

Oracle Lighting
800-407-5776
www.oraclelights.com

includes:

Four white LED rock lights
Mounting gaskets
Mounting hardware
4-to-1 easy wiring hub