1955 Chevy Pickup Known As Mr. Truck

44 Years of Cruising and Wrenching on This ’55 Chevy Pickup

Owning the same truck for 44 years is quite an accomplishment. Not many custom truck enthusiasts can walk out into the garage and climb into the same cab they have been enjoying seat time in for more than four decades. In all seriousness, 44 years is a long time, and for a man to hold onto a truck through the ups and downs of business and family life is remarkable.

Randy Whiteside’s journey with the ’55 Chevy pickup radiating off of these pages started in 1974 when his brother Ron brought the truck home, retiring it from daily service as the shop truck for Dana Radiator. Randy and Ron disassembled the truck on Labor Day weekend that year and had everything sandblasted, only to find significant amounts of rust. A lap through the local bone yard netted some clean replacement body panels, and the brothers cleaned and painted the chassis and laid on a coat of primer. Fit with a 355-ci LTI, a top-loader four-speed and a 9-inch rearend, Randy cruised through the late ’70s in his freshened Chevy.

Working in their parents’ carport on nights and weekends, the brothers progressed the truck through the various styles of the ’70s, ’80s and ’90s.

In the ’80s, the old double nickel bow tie got a Ford LTD front end to convert the old straight axle to IFS with power disc brakes. In 1982, Randy met John Boyle, an expert body man and metal fabricator, and the two struck up a friendship. Boyle agreed to modify the bed to fit Randy’s extra wide ’70s wheel-and-tire combo.

Fast forward eight years and along came the ’90s. In went a 515-hp blown 383 backed by a TCI Turbo 400 transmission, a narrowed 9-inch rearend with a custom four-bar and coil-overs by Randy and Boyle, and of course, the requisite ’90s Pro Street steamroller rear rubber stuffed into the step-side fenders. Cue the pastel tank tops, OP shorts and Oakley Blade sunglasses.

In 1992, after Ken Gartman and Don Mackey reworked the dash and fabricated the gas filler door into the rear fender, Tom Kegler (Kegler Custom) rolled the truck into his spray booth and applied some color, which was the first time the truck had worn anything but battleship gray primer since 1974.

In 2003, Randy pulled the motor out to freshen it up while the truck went to California to have a new IFS grafted on. When the truck returned to Arizona, the new front end presented another setback, or a step forward, depending on how you look at it. The shop that performed the front-end upgrade had forgotten that the wheelbase was 2 inches longer than stock and had welded the new IFS in the stock location, making it extremely difficult  to rehang the front sheet metal.

At this stage of the build game Randy lost interest and the project was sidelined for nine years. In 2012 he decided he wasn’t getting any younger and it was time to finish the truck once and for all.

To get the ultimate custom bones for this classic bow tie hauler, Randy contacted The Roadster Shop and had the team build a Fast Track chassis complete with RS independent front and rear suspension. Wilwood 13-inch four-piston brakes handle rear deceleration duties. Under the nose of this wicked pavement-pounder lies AFCO adjustable coil-overs, Z06 Corvette spindles and Wilwood 13-inch rotors with six-piston calipers. Wilwood dual master cylinders get fluid to the big Wilwood binders, which show nicely through the window openings of the 19×19-inch front and 20×12-inch rear Budnik G10 wheels mounted on Michelin Pilot P265/35ZR19 front and P345/30ZR20 rear rubber.

To make this old bow tie brick run like the wind, Turn Key Engine Supply in Oceanside, California, assembled a 376-ci 525-hp LS3, which delivers 486 ft-lbs of asphalt-ripping torque. The late-model mill breathes with ASA CNC-ported heads, TRS modified stainless headers feed into a custom-fabricated stainless exhaust courtesy of Boyle. Magnaflow mufflers handle throttle and gear change tones. A Ron Davis radiator keeps things cool, while a K&N air intake speeds initial air flow, and a Vintage Air accessory drive system spins the LS smoothly and freely. A custom-built 4L70-E overdrive transmission fit with a 2,800 stall speed converter handles gear commands with a custom chrome-moly driveshaft linking the gear box and rearend.

Now that the chassis, suspension and drivetrain were in check to form a killer asphalt-kicking hot-rod pickup, Randy turned his attention to the body. His friend Kegler handled paint duties once again and laid down PPG Charcoal. A massed 1955 front bumper by Kegler and a custom grille by Randy and Boyle redefines the nose, while a massaged rear El Camino bumper adorns the 1963 Chevy long bed Boyle customized. A custom gas filler by Gartman and a custom bed floor and tonneau cover by Boyle are further accented by Kindigit Design door handles.

Before adding new upholstery, Gary Schalge, a retired GM master mechanic, repinned the computers to make the LS rumble and the transmission shift like butter. Ed Mowtown from ERM Performance massaged the hp tuner’s software to smooth perfection, and Tim Benedict performed the four-wheel independent steering alignment and tuned the braking and steering systems for optimum performance. For driving beats, Bob Brackey installed and cleanly wired the JBL speakers and Kenwood amps.

To get the cab up to par, Randy delivered the truck to Armando’s Custom Upholstery in San Jacinto, California, where Armando Sr. and Jr., George and Able worked their slick stitch magic on the cab’s innards. Leather covers the seat and door panels, and a thick Mercedes wool carpet was draped over the floor. A Budnik billet steering wheel handles driver input in style, while Dakota Digital gauges and a Vintage Air climate control system provide modern creature cruising comforts.

THE STEALTHY PAINT FINISH COMBINED WITH SUBTLE BODY MODIFICATIONS AND A STYLISH CRUISING CHAMBER FINISH THE TRUCK JUST RIGHT …”

Randy Whiteside, with the help of some dedicated hot-rodding friends and a supportive family, has created a sharp classic Chevy hauler capable of flat-footed, straight-line fun, as well as some corner-carving on twisty roads. The modern LS3 power, RS underpinnings, big Wilwoods capped with a sinister-looking combo of Budnik wheels and Michelin rubber give the truck all of the modern power and handling of a sports car in a classic truck package. The stealthy paint finish combined with subtle body modifications and a stylish cruising chamber finish the truck just right, and Randy is not afraid to drive it long distances. Here’s to another 44 years of the Whiteside family enjoying Mr. Truck. 

TRUCK SPECS

owner

Randy, Sue and Breena Whiteside
1955 Chevy Pickup
Paradise Valley, AZ 

Engine

• Turn Key Engine Supply LS3
• 525 hp, 486 lb-ft torque
• Roadster Shop modified stainless headers
• Custom stainless exhaust by John Boyle
• Magnaflow mufflers
• K&N air intake
• Vintage Air accessory drive system
• Ron Davis radiator
• 4L70-E transmission, 2,800 stall

 Chassis & Suspension

• Roadster Shop Fast Track chassis
• Roadster Shop IFS/IRS
• AFCO double adjustable coil-overs
• Corvette ZO6 spindles and hubs
• Roadster Shop Fast Track front shocks
• Wilwood 13-inch rotors/six-piston calipers, front
• Wilwood 13-inch rotors/four-piston calipers, rear

Wheels & Tires

• 19×9-inch Budnik G10
• 20×12-inch Budnik G10
• Michelin pilot Super Sport 265/35ZR19
• Michelin pilot super sport 345/30ZR20

Body & Paint

• Massaged 1955 front bumper
• Custom grille by John Boyle and owner
• Modified 1963 Chevy long bed by John Boyle
• Modified El Camino rear bumper
• Smoothed and capped bed rails
• Custom gas filler by Ken Gartman
• Custom aluminum bed cover by John Boyle
• PPG custom-mixed and sprayed by Tom Kegler/Kegler Custom

Interior & Stereo 

• Custom interior by Armando’s Custom Upholstery
• Budnik billet steering wheel
• Dakota Digital gauges
• Vintage Air climate control
• Dynamat sound deadener
• JBL and Kenwood audio components

Special Thanks From the Owner: “Wife Sue, daughter Breena, brother Ron Whiteside, John Boyle, Gary Schalge, Tim Benedict, Bob Brackey, Tom Kegler, Ken Gartman, Don Mackey, Turn Key Engine Supply, The Roadster Shop, Armando’s Custom Upholstery and Ed Mowtown/ERM Performance Tuning.”

FREQUENTLY ASKED QUESTIONS

What were the initial conditions and modifications of the ’55 Chevy Stepside when James found it?

James began his search for a classic truck in 1993, with a preference for a Ford F-100. However, two years later, he discovered a ’55 Chevy Stepside just five miles from his home—a vehicle he had been searching for across California, the Southwest, and even Portland, Oregon.

When James found the truck, it was coated in primer gray, with a straight body that indicated it had been well-maintained. Mechanically, it featured a small-block V8 engine, a 9-inch rear axle, and a front clip commonly used for such modifications. James decided to keep these components, as they were in good condition and functioned well together.

What specific work was done on the truck at Wheeler’s Speed Shop?

Work Done on the Truck at Wheeler’s Speed Shop

When the work was completed at Wheeler’s Speed Shop, it involved an extensive repainting to address significant damage. Initially, the truck was stored in a facility in Chatsworth, California, where a piece of air-conditioning duct fell onto it due to inappropriate roofing work during severe winds. This accident resulted in substantial scrapes on the hood and fenders.

To restore the truck, Wheeler’s Speed Shop undertook a meticulous three-stage paint job, which is notably challenging to match. The team had to respray nearly the entire vehicle, with the exception of the roof. This comprehensive repainting ensured that the truck’s appearance was flawlessly restored. Despite the difficulties with the insurance claim, the costs for all the paint and bodywork were ultimately covered.

What are some of the unique interior features of the ’55 Chevy 3100?

Randy delivered the truck to Armando’s Custom Upholstery in San Jacinto, California, where Armando Sr. and Jr., George, and Able worked their slick stitch magic on the cab’s innards. Leather covers the seat and door panels, and a thick Mercedes wool carpet was draped over the floor. A Budnik billet steering wheel handles driver input in style, while Dakota Digital gauges and a Vintage Air climate control system provide modern creature cruising comforts.

But that’s not all. The ’55 Chevy 3100 boasts a dashboard that remains true to its roots, maintaining the original stock appearance. Gauges are enhanced with a Moon accessory, adding a touch of retro flair. While there’s no stereoinstalled yet, the potential for customization is endless. The steering column is sourced from Flaming River, providing reliability and precision. The seat retains its classic charm as a stock bench, meticulously upholstered by Sean “Fat Lucky” Johnstun from Austin Speed Shop, TX, in pristine white vinyl. To complete the nostalgic yet stylish look, the floor is covered with ’50s Buick Trinidad green loop pile carpet.

These custom touches blend seamlessly with the classic elements, creating an interior that is both luxurious and true to the essence of the ’55 Chevy 3100. The combination of modern upgrades with vintage aesthetics ensures a comfortable, stylish ride that pays homage to its heritage while offering today’s conveniences.