The Right Hardware for Your Hauler

Cordless Tungsten Grinder

TIG welding requires nice, sharp tungsten electrodes for quicker arc starts, improved puddle control, and high-quality welds. The Summit Racing Cordless Tungsten Grinder allows you to accurately sharpen 0.04-, 1/16-, 5/64-, 3/32-, and 1/8-inch tungstens. The grinder gives you a choice of 10-, 15-, 20-, 22.5-, and 25-degree angles.

Summit Racing Equipment
800-230-3030
www.summitracing.com

Other features include:

• Heavy-duty, double-sided diamond grinding discs for 200 sharpenings per side
• Built-in tungsten breaker for removing a balled or contaminated end
• Speed selector lets you set grinding speed based on tungsten condition
• Rechargeable Li-ion battery

---

Max-Lift BSR Shaft Rocker System

The COMP Cams Max-Lift BSR Shaft Rocker System boosts valve-train stiffness for Gen V LT engines, reducing deflection, and maximizing camshaft performance. With improved rigidity and support for cams up to 0.675-inch lift, it delivers more horsepower and durability for LT1, LT2, LT4, LT6, and L86 engines.

Summit Racing Equipment
800-230-3030
www.summitracing.com

Highlights include:

• Manufactured using race-winning off-road race spring technology
• Developed to provide balanced ride quality, control, and off-road capability
• Finished in heavy-duty corrosion-resistant silver coating
• Compatible with factory FOX shocks
• Made in USA
• Limited-lifetime warranty

---

LS and LT Forged Crankshafts

Callies Apex Series Forged Crankshafts for GM LS and LT engines fill the gap between the entry-level Compstar forged cranks and the full-boogie Magnum Series and billet cranks. Able to support 2,000-plus horsepower, the Apex crankshafts are made on the same premium 4340 forgings Callies uses for their Magnum Series cranks.

Summit Racing Equipment
800-230-3030
www.summitracing.com

Apex Crankshafts for LS Engines

• 3.625-inch stroke
• 4-inch stroke, available for wet or sump oiling system
• 4.125-inch stroke
• 4.25-inch stroke

Apex Crankshafts for LT Engines

• 3.625-inch stroke, available for wet or dry sump oiling system
• 4-inch stroke, available for wet or dry sump oiling system

---

’73-’79 Ford Hood Hinges

These 1973-’79 Ford hood hinges from Fat Fender Garage are made from billet aluminum. With them, you’ll experience smoother hood operation. These are for lowered vehicles where the inner fenders are removed. Hinges mount to the firewall where the inner fenders mount. Some cutting will need to be done for these to fit.

Fat Fender Garage
480-621-6072
fatfender.com

Reverse Floor Mount Trunnion Brake & Clutch Pedal

Wilwood Racing has engineered two new reverse floor mount brake pedal assemblies: one with a standard bias adjuster Balance Bar and the other with a precision Tru-Bar. Both forged aluminum pedal arms allow for mounting the horizontally adjustable foot pads in three vertical positions to fine-tune the pedal ratio. The clutch pedal incorporates an adjustable stop to limit travel for fine-tuning clutch engagement.

Wilwood
805-388-1188
www.wilwood.com

Chrome Finish Serpentine Kits

Make your engine bay the centerpiece of your build with chrome finish serpentine kits from All American Billet. The brackets are made from 6061-T6 aluminum and come in a chrome finish. Kits come with an option of two different pulley styles at no additional charge: a classic pulley with no holes or cutouts or an original pulley with triangular cutouts.

All American Billet
844-245-5381
www.allamericanbillet.com