RESTORATION RIOT | Replacement and Upgrade Parts You Need! C10 and F100
Replacement and Upgrade Parts Galore
In this modern age, we expect more bang for our buck, even if we must invest a few more dollars in order to get it. Building a respectable truck isn’t cheap, but that doesn’t mean you can’t have a dependable, cool-looking performer without having to starve. From exterior products to get the image of the truck you’ve been dreaming about to interior parts to make extended road trips more comfortable, there’s something to satisfy everybody’s taste and bank account. Having options really is the best thing you could ask for when diving into any custom project.
Restoring an old truck isn’t just about what you can see inside and out, it’s also about how it feels and what you know is stashed under the hood or on the chassis. Engine and suspension components are literally the driving force of any ride and having both systems up to snuff will make all the difference in how much you enjoy your truck.
With that we’ll let you loose to wander around some of the products that can assist you in realizing your best possible truck. There’s no right or wrong way to do it, just build smarter, not harder.
[divider] EXTERIOR [/divider]
1963-72 7.5-inch C-10 Raised Bed Mounts
MSRP: $249.99
GSI MACHINE HAS designed these bed mounts to work with any kind of rear bridge setup to raise your factory bed floor 7.5 inches from stock in order to clear the bridge. If you’re looking to ’bag your truck and are worried about maintaining a factory looking bed section, these mounts will definitely help make that happen. The kit includes four bed mounts that bolt right into the factory frame location, as well as all necessary hardware.
GSI Machine & Fabrication
877.951.1890
Gsimfab.com
1973-80 C-10 7-Inch LED Headlights
MSRP: $389.95
THESE LED HEADLIGHTS not only increase light output, which dramatically improves safety and visibility at night, but the solid-state, bulb-free design resists damage from shock and vibration. The DOTcompliant headlights are more energy efficient and last longer than conventional bulbs. Low and high LED beams are built right into the housing.
LMC Truck
800.562.8782
LMCtruck.com
1969-72 C-10 Cargo Light With Third Brake Light
MSRP: $49.99
HERE’S AN IDEAL replacement for your busted cargo light lens. This one features 18 white LED cargo lights and nine red LED lights. It’s epoxy coated and fully sealed. It has a cool, clear look when not in use, and a minimalist look when the lights are on.
United Pacific Industries
562.912.2858
Upauto.com
Wood Bed Kit
MSRP: Complete Kits Starting at $455
THERE’S NOTHING MORE timeless than a plank wood bed floor. MAR-K can make pretty much any and all of your wood bed floor dreams come true with everyday wood types such as pine and oak, and it can take you into the realm of the exotics with African teak, Honduran mahogany and zebrawood. Even if you haven’t heard of those types of wood, it’s always nice to know you have options. All kits are also available with polished, aluminum or steel strips to get the exact look you’re going for.
MAR-K Manufacturing
844.Mar.K844
Mar-k.com
1973-87 Mild Tubz
MSRP: $729/set
THE NEW MILD Tubz from Slosh Tubz focus on static-dropped or mildly ’bagged C-10 pickups. These bolt-in fenders are about 2 inches taller than stock and are widened for a clearer turning radius. The Tubz have also been smoothed and are available contoured to go around the factory AC or for smooth firewall applications. The gloss black gel coat is perfectly fine to install as-is, and it also makes a prime base for custom paint. Also available from Slosh Tubz is a battery relocation bracket and side filler panels.
Slosh Tubz
479599.9664
Sloshtubz.net
1967-72 C-10 Silverline Billet Hood Hinges
MSRP: Starting at $599.95
ADD A LITTLE style under the hood with All American Billet’s hood hinges for 1967-72 C-10s. These bad boys are machined from 6061-T6 aluminum and are offered in three finishes: machined, polished and the premium Silverline option featuring black anodized details. These hinges not only look killer, they are engineered to operate smoothly and last forever.
All American Billet
844.245.5381
Allamericanbillet.com
1973-87 Fleet-Side Clear Taillights
MSRP: $160
WITH SO MANY different LED taillight options on the market, it’s refreshing to see clear tails again. The cool thing about these is that even if you don’t plan on keeping them clear, they serve as the perfect base for a custom paint job (or order them smoked). Klearz even offers these OEM-quality lenses with or without reflective red strips, so the selection of tail looks is plenty. Regular LED and sequential LED light kits are also available, along with high-quality chrome trim.
Klearz
Klearz.com
1973-87 One-Piece Window Kit
MSRP: $749.88
THERE’S A WIDESPREAD love/hate epidemic with vent windows going on, but this one-piece window kit receives nothing but positive attention. This kit eliminates noisy vent windows in favor of the smooth appearance and operation of a single pane of glass. The window is specially cut, which allows for ideal sealing around the window and easy roll-up/down functionality. All felt channels, a custom scraper kit and all hardware necessary for installation is included in the box.
Carolina Classic Trucks
336.298.4168
Carolinaclassictrucks.com
Front Fender Emblems
MSRP: $89.99
CLASSIC INDUSTRIES CARRIES OER reproduction emblems of all kinds to replace the broken or missing versions on your truck. Each emblem is die-cast, chrome-plated and painted with correctcolored accents for an exact OEM appearance. Even the back of the emblems is manufactured with correct markings, but these are officially licensed GM Restoration pieces, so it’s no surprise that you’re getting top-shelf quality.
Classic Industries
800.854.1280
Classicindustries.com
1967-86 Honeycomb Grille
MSRP: $1,500
FOR THOSE WHO want to add a different spin to the front end of their C-10, the honeycomb grille from Jast Performance provides just that. The ¼-inch-thick aluminum water-jet grille with fabricated surrounded is a quality addition to your truck’s grille shell and has been designed to bolt right into place.
Jast Performance
980.213.8801
Jastperformance.com
1970-72 Mirrors With LED Turn Signal
MSRP: $65.51/each
WHETHER YOUR TRUCK’S factory mirrors are damaged or you’re looking for an easy updated upgrade for the exterior, Union Pacific’s side mirrors with LED turn signals are the perfect products at a great price. They have won an NSRA safety award and have been designed to offer modern function with a classic appearance.
United Pacific Industries
562.912.2858
Upauto.com
[divider] INTERIOR [/divider]
Solid Wood Grip Steering Wheel
MSRP: $245
PRECISION MILLED FROM hardwood blanks created from 18 individual segments, CON2R’s wood grip steering wheels are able to be grain matched and are finished by hand to ensure the highest level of quality. Incorporating any type of wood into your truck’s interior will immediately bump the class level up a few notches.
CON2R
503.626.6390
Con2r.com
1947-87 14-inch Half-Wrap Steering Wheel
MSRP: $229.99
FOR A MORE subdued steering wheel appearance, Brothers now offers a wide assortment of custom steering wheels in many options. This blackon- black example features a retro GMC logo horn button and black vinyl wrap. The center is constructed from machined aluminum and can either be ordered in a powder-coated matte black finish (as shown) or polished.
Brothers Truck Parts
800.977.2767
Brotherstrucks.com
1967-72 C-10 Kick Panels
MSRP $89.99
RETROSOUND’S KICK PANELS mount easily into classic C/K series GM trucks and fit most 6.5-inch speakers for a wide range of compatibility. The speaker mount is angled to direct sound upwards towards the listener’s ears, not at the ankles. Panels come in a textured black finish that can be left as-is or painted to match the interior. The kick panels are available blank or with speaker and RetroMat sound deadening material as upgrades.
RetroSound
888.325.1555
Retromanufacturing.com
1967-72 Gauge Bezels
MSRP: $195
WANT A QUICK and easy (not to mention affordable) method of upgrading your dash to fit with the rest of the interior space? Clayton Machine has the answer with its new gauge bezels featuring three completely different looks: carbon fiber, brushed aluminum or hot-rod pinstripe. The bezels will work with stock or direct-fit aftermarket gauges and are a great way to get a one-off look without the one-off price.
Clayton Machine Works
865.824.9778
Claytonmachine.com
1967-72 Direct Fit Pedal Arms
MSRP: Contact for Pricing
MACHINED FROM 6061 aluminum, Lokar’s pedals are designed to mount directly into the factory locations on all 1967-72 C-10s for a modern twist on a classic design. Lokar also offers different styles of pedal pads to choose from, as well as matching throttle assemblies that feature adjustable arms, 48-tooth fine spline and Delrin bushings for smooth operation.
Lokar
865.824.9767
Lokar.com
1973-87 HDX Instruments
MSRP: $1,295
DAKOTA DIGITAL HAS outfitted some of the most popular truck models with state-of-the-art instrumentation, and now, the beloved squarebody 1973-87 pickup can be hooked up in similar fashion. A TFT-display has been added in each large opening for ultimate customization. Black or silver alloy gauge-face options are available, and the HDX system allows for independent illumination colors for the gauge readings and needles, as well as message centers for the perfect color coordination.
Dakota Digital
800.593.4160
Dakotadigital.com
Billet Aluminum Interior Door Handles
MSRP: Starting at $70
EDDIE MOTORSPORTS OFFERS a wide range of interior handles, in many styles and finishes, constructed of CNC-machined 6061 T6 aluminum. Door handles and window crank applications are available, along with matching window vent cranks to get the exact look you’re after. Designed to be compatible with GM shafts from 1949 to present.
Eddie Motorsports
888.813.1293
Eddiemotorsports.com
1973-87 Square-Body Series Pro Dampening Kit
MSRP: $379
TOGETHER WITH VIBRO Solutions, Squarebody Syndicate now offers a complete four-box kit of 2mm dampening material that will cover the inside of the cab from firewall to back wall, as well as cab roof and doors. Vibro dampening material acts as a sound and vibration absorber, which is really the best addition to your sound system possible. Audio signals go up while annoying road noise volume goes way, way down.
Squarebody Syndicate
Squarebodysyndicate.com
1967-72 Sport XR Door Panels
MSRP: $831.97
TMI PRODUCTS MAKES upgrading your truck’s interior almost too easy. From seats to center consoles, and way more, it can outfit the entire cab from floor to ceiling. TMI can also assist in upgrading the doors with its Sport XR door panels. They feature premium black vinyl with contrast stitching in a color of your choice along with grommet inserts available in either black, stainless or brass. Installation is as simple as can be; you’ll be amazed by how quickly your cab improves.
TMI Products
888.460.0640
Tmiproducts.com
1967-72 Basic Interior Kit
MSRP: Starting at $549.95
LOOKING TO COMPLETELY gut your truck’s ratty old interior and start from scratch? Well, it’s not as hard (or expensive) to do with LMC Truck’s Basic Interior Kit. The package comes complete with a plastic dash pad cover, plastic door panel set, padded armrests and a molded carpet kit, as well as a vinyl bench seat reupholstering kit. Save some cash by ordering everything seen here in one single package, and avoid the headache of piecing together all of the correct part numbers.
LMC Truck
800.562.8782
LMCtruck.com
Deep Dish Salt Flat AC Vent
MSRP: Starting at $175
LOOKING FOR AC vents to match your salt flat wheels? If so, there’s nowhere else you are likely to find them except from RestoMod Air. The billet aluminum vents mimic the timeless wheel design that everyone loves, and the amount of engineering that has gone into creating them is amazing. From the precision CNC machining to the ribbed layers of the Deep Dish housing, these vents are just as cool as the wheels themselves.
RestoMod Air
866.784.4278
Restomodair.com
Waterfall Center Console
MSRP: $499.98
TMI PRODUCTS HAS already dialed in the classic truck interior game, and now it has a brand-new trick up its sleeve. This waterfall center console isn’t like any of the others it’s designed so far; this one features a built-in armrest with storage area underneath. If you want to add bucket seats and need a console solution that not only looks great, but also creates a way to store a few extra items, this is the piece for you.
TMI Products
888.460.0640
Tmiproducts.com
300-Watt Bluetooth Stereo
MSRP: $329.99
AVAILABLE FOR ANY year C-10, Brothers Truck Part’s top-of-the-line Bluetooth enabled drop-in stereo requires absolutely no cutting of the dash for proper installation. It simply wires up and fits right into the factory mounting position. Get the latest in today’s wireless connectivity and hands-free phone operation in an easy-to-use stereo package designed specifically for your truck.
Brothers Truck Parts
800.977.2767
Brotherstrucks.com
Gen-IV SureFit AC System
MSRP: $1,479.99
VINTAGE AIR’S GEN-IV air-conditioning systems are model-specific, so you can rest assured that it’ll fit perfectly in your truck and will blow cold air in the cab come summertime. All Gen-IV kits are delivered with an evaporator kit, a condenser and drier package, brackets, mounting hardware and complete instructions to help you every step of the way. Get the Vintage Air kit that is made for your specific truck model from Summit Racing.
Summit Racing
800.230.3030
Summitracing.com
Undercover II Speaker Enclosures
MSRP: $165/pair
WHOEVER SAID THAT it’s impossible to squeeze in a complete (and thumpin’) audio system in your single cab C-10 hasn’t seen the Undercover II sealed woofer packages yet. These give you way more sound than you bargained for considering that they were designed to stash under your seats or back wall. Each unit features one 8-inch woofer and two Piezo tweeters, and measures only 3x11x12.5.
Custom Autosound
800.888.8637
Casmfg.com
[divider] SUSPENSION [/divider]
1963-72 C-10 Extreme Drop Spindles
MSRP: $269
CPP’S EXTREME DROP spindles for C-10 pickups were designed to be the perfect blend of late-model strength and technology in a vintage application. The spindles use a bolt-on sealed bearing and hub assembly and are ideal for trucks running 20-inch or larger diameter wheels.
Classic Performance Products
714.522.2000
Classicperform.com
1963- 87 C-10 Adjustable Shock Absorbers
MSRP: $139.95
BOLT-ON BILLET HIGH-PERFORMANCE shock absorbers are available in different lengths, which make them great to use with lowered suspension heights. The single adjustable shocks are designed as direct replacements for OE shocks and greatly improve handling and ride quality.
Aldan American
310.834.7478
Aldanamerican.com
1963-72 C-10 Adjustable Trailing Arm/Carrier Bearing Cross Member
MSRP: $249
THIS UNIT BOLTS in at the top and side of the frame rather than using bolts on the bottom. Exhaust ports accept up to 3-inch-diameter pipe. The raised center section will accommodate a raised driveline, and the unit features multiple mounting positions for trailing arms.
All American Billet
844.245.5381
Allamericanbillet.com
C-10 Front Control Arm Suspension Kit
MSRP: $1,504.80
GAIN RIDE HEIGHT adjustability and up to 7 degrees of caster with QA-1’s coil-over conversion for 1963-87 C-10 trucks. The kit includes a lower control arm, an optional upper control arm, an upper mounting bracket, a single or double adjustable coil-over shock and a high travel spring, and all necessary hardware.
QA1
952.985.5675
Qa1.net
Front and Rear Sway Bars for C-10
MSRP: $519.90
AVAILABLE FOR 1963-87 C-10 (front) and 1963-72 (rear), QA1’s sway bars are designed to improve performance and handling, and they’re available individually or in pairs (front and rear).
QA1
952.985.5675
Qa1.net
1973-87 C-10 Flip Kit With Notch
MSRP: $267.80
WITH SQUARE-BODY C-10 pickups rising in popularity, it’s reassuring to see that there are drop kits available to fit tight budgets. This flip kit will drop the rear end a solid 6 inches by relocating the rear axle from beneath the leaf spring to above. The kit comes complete with a C-notch, which is a must when lowering the back end this dramatically.
Belltech
800.445.3767
Belltech.com
DS2 Shocks
MSRP: $44.95/each
DESIGNED SPECIFICALLY FOR 1947-87 Chevy and GMC trucks, Western Chassis’ DS2 shocks are perfect for stock height applications and lowered trucks as well. The high-performance valving, hardened chrome piston rod, low-friction Teflon seals and guide bushings and OEM-style mount bushings make the DS2 shock perfect for your truck.
Western Chassis
866.288.5673
Westernchassisinc.com
Hyper-Flex Performance Bushings and Mounts
MSRP: Contact for Individual or Package Pricing
YOUR TRUCK IS going to need its old bushings and body mounts changed if you want it to ride/handle to your liking. Energy Suspension has you covered with single parts or complete kits, including engine and transmission mounts, body mounts and control arm, leaf spring and sway bar bushings.
Energy Performance
888.292.1250
Energysuspension.com
1963-70 Deluxe Disc Brake Conversion Kit (Five- or Six-Lug)
MSRP: $675
IF YOU WANT to upgrade your truck’s factory braking system without going broke, look to Western Chassis’ all-inclusive disc brake kit. It comes with 12-inch rotors, GM pads and calipers, all bearings, seals and hoses, stock height or 2.5-inch drop spindles and all necessary hardware to convert to discs at the wheel. You’ll be glad you made the change after the first test drive.
Western Chassis
866.712.9690
Westernchassisinc.com
[divider] ACCESSORIES [/divider]
1973-87 C-10 LS Engine Adapter Kit
MSRP: $99.99
GOT AN LS you’d like to plant inside your truck’s engine bay? Performance Online has just what you need to make it happen. The LS engine mount adapter kit is specifically designed for 1973-87 Chevy and GMC trucks and will ensure proper frame location alignment (and even includes more than 1 inch of adjustment for finetuning engine position). The kit does allow for use of factory clamshell mounts. Consider your power problem officially solved.
Performance Online
888.990.8218
Performanceonline.com
Streamline Valve Covers
MSRP: $224.95/Pair
THE STREAMLINE SERIES valve covers are available in tall heights with a 1 ¼-inch-diameter breather hole positioned between the rockers to reduce oil splash. The high-grade aluminum covers come powder coated or media blasted for a ready-topaint finish for maximum customization.
Billet Specialties
800.245.5382
Billetspecialties.com
Delray Wheels
MSRP: Starting at $254/wheel
THE GUYS AT MOB Steel/ Detroit Steel Wheel Co. get it. They understand that old-school trucks deserve to roll on wheels built with soul. The Delray is just one of Detroit Steel’s cool wheel offerings that feature throwback styling mixed with today’s demand for increased diameter sizes (18s-22s) and finishes, including raw, black and white colors with flat and gloss options. Also choose from a selection of caps and lug covers to cook up the best look for your C-10.
Detroit Steel Wheel Co.
810.333.6100
Detroitsteelwheel.com
OE Six-Lug Wheel
MSRP: Starting at $84
Sometimes classic trucks need to have classically inspired wheels to look their best. Wheel Vintiques has your ride covered with its vintage-look 15-inch steel wheels built using modern materials and equipment.
Wheel Vintiques
800.959.2100
Wheelvintiques.com
1964-66 C-10 Bow Tie Hubcap Set
MSRP: $269.99
FINDING ORIGINAL HUBCAPS is getting tougher, but these reproduction versions from Classic Industries can alleviate the stress of tracking down an elusive OEM set. These here are chrome plated, include bow-tie logos in the center and are officially licensed by General Motors.
Classic Industries
800.854.1280
Classicindustries.com
Widowmaker 6 Universal Muffler
MSRP: Starting at $154
YOUR TRUCK’S OLD muffler may be rusted out, so why not swap in the Widowmaker 6 muffler, the latest addition to Black Widow’s lineup of performance products? With a 6×5-inch body profile, it’s the company’s smallest muffler offering and its most aggressive. This unit is ideal for those who want a straight pipe sound with maximum volume.
Black Widow Exhaust
949.333.0906
Blackwidowexhaust.com
Optima Battery
MSRP: $281.99
THE FIRST ORDER of business for any restoration should be swapping out the economy grade battery for an Optima, especially if you’re planning to add audio gear or any other type of electronic accessories. Get better cranking power and cycling capability with a heavy-duty cell that was designed to provide consistent power output with much faster recharges.
Summit Racing
800.230.3030
Summitracing.com