Up next

Author

Share article

Facebook 0
Twitter 0
Mail 0

The Process Behind Poppy’s Patina

Patina Protection Perfected

Older generations would tell you to rub your truck down with oils, like boiled linseed, to prevent further oxidation. But with the oils come issues; they lack the necessary components to keep your patina truly safe from everyday elements like UV radiation. They fall even shorter when it comes to protecting it from harsher conditions like acid rain.

That’s where Poppy’s Patina steps in. The company has developed a line of urethane-based matte and gloss clearcoats that have been designed specifically for patina paintjobs. The Oklahoma-based company even developed a wipe-on clearcoat for the DIY truck owners who don’t have access to any automotive paint equipment. For larger projects, Poppy’s offers the standard spray-on formula, allowing for greater surface application in a shorter amount of time.

Subscribe to our weekly newsletter

This happened to be perfect for Salvage to Savage’s newest GMC patina van project. The guys at Poppy’s Patina headed down to South Florida with some of the company’s matte clearcoat to give them a hand!

Poppy’s Prep

The GMC Vandura was still rocking the original factory paint from the 1970s, and the crew at Salvage to Savage wanted to make sure the Florida elements didn’t turn the van into a pile of rust. Brian from Poppy’s Patina kicked off the process by hosing down the van and giving it a wash with Poppy’s pre-cleaner, using the scuffing pad to prep the surface. The scuff pad not only helped to remove stuck-on debris from the paint, but it also created a more adhesive surface for the clearcoat.

Once cleaned, the guys moved the GMC van inside the shop to start wiping it down with Poppy’s Patina degreaser. The degreaser is designed to bring the trapped oils and leftover debris up to the surface of the paint, helping to remove anything that could affect the clearcoat’s adhesion. It’s important to wipe the degreaser on and be able to wipe it away with a clean cloth before the chemicals evaporate. The hot Florida sun would have caused the degreaser to flash off far too fast for it to work effectively, which is why the GMC was moved out of the direct sunlight for this step.

Last Steps

The last prep stage before applying the clear was to mask off any surface that didn’t need a urethane coating. With the van taped up, it was time to mix the clearcoat catalyst into the matte urethane base. Just like the degreaser, it’s not beneficial to have the clearcoat flash too quickly during the application. It’s best practice to spray or wipe on the urethane protection in a well ventilated garage, under a carport, or anywhere out of direct sunlight.

Since the guys were trying to avoid any overspray inside the shop and didn’t have a carport at their disposal, they decided to wait until the early morning to apply the urethane clearcoat to the van. With the Florida sun low in the sky and the temperatures at their coolest, the team quickly worked its way around the van, putting down a thick, even coat of protection. Instantly the color of the van began to pop and appear more vibrant under the matte coat and the natural rust colors of the patina really came to life. Within an hour, the urethane clearcoat was dry to the touch. The surface no longer had a rough, uneven texture. The smoothed topcoat made it easy to wipe down the van with a microfiber cloth without fibers of the towel being snagged by what would normally be jagged oxidized paint and metal.

After waiting only 24 hours, the protective coating was fully cured and Salvage to Savage’s 1970 GMC Vandura was ready to hit the road without fear of the Sun’s UV rays, chunky bird droppings, and the salty, corrosive, Florida climate.

Here’s a closer look at the perfect patina on the driver’s side of this GMC Vandura.
Poppy’s Patina has developed a line of urethane-based matte and gloss clearcoats that have been designed just for pantina paintjobs.
Start with a rinse to get all the large pieces of dirt and debris off the surface of the van.
The first product needed from the Poppy’s line is the company’s Pre-Cleaner.
It’s always a good idea to use PPE when handling any cleaning or painting solvents, no matter their strength.
Just like with a normal car soap, add the pre-cleaner to a wash bucket filled with water.
Begin giving your paint a good scrub.
The pre-cleaner helps to remove a lot of the baked on crud that have called your paint home over the years.
The gray pad mildly scuffs the paint to give the clearcoat a textured surface for better adhesion.
Give the truck or van a thorough rinse to wash away the Pre-Cleaner.
Move the vehicle into a covered or shady surface for the next steps.

Apply the Poppy’s Patina Degreaser onto one of their supplied wiping rags. Wipe down the entire vehicle with the Degreaser. Follow every swipe of the wet rag with a swipe of a dry rag. The wet rag pulls the grease to the surface, while the dry wipe removes it from your paint.
Moving the vehicle into the shaded area allows you to wipe off the wet degreaser with the dry towel before it flashes off of the paint.
Be thorough with the degreaser to make sure no spot is missed.

Mask off any surface that you don’t want to clearcoat.

Poppy’s Patina clearcoat can be wiped off easily with xylene before it cures, but it’s always easier to take the time to tape off any marker lights, emblems, or chrome trim.
Drop paper makes it easier to cover large areas like grilles and bumpers.

Mix up the matte or gloss clearcoat, mix with your catalyst, and load it into your paint gun’s hopper.

It’s always best to spray your clearcoat in a shaded area like a car port. But if no covered area is available, spray as early as possible so the paint isn’t hot and the chemicals in the clearcoat don’t flash off too fast.
By mixing smaller amounts of clearcoat and catalyst together, you can work at your own pace without worrying about the clearcoat setting and clogging up the sprayer.
When spraying, you don’t need to dust your first coat. Spray a nice even coat, avoiding going too heavy to prevent the clearcoat from running.

Work your way around the entire vehicle, making sure to overlap your sections to keep your clearcoat coverage even.

Within an hour your clearcoat is dry to the touch, and you can start replacing any emblems and removing the tape from your trim.
Within 24 hours the clearcoat has cured and is now hydrophobic and safe from the elements.

Not only is your patina protected for years to come, but it appears much smoother and more vibrant!

 

You May Also Like