Up next 1998 Chevy S-10 on air suspension with shaved body doors and 20 inch wheels Published on September 21, 2022 Author Mike Self Share article Facebook 0 Twitter 0 Mail 0 Bagged and Bodied ’91 Chevy S-10 Blazer A New Home for an Iconic Ride It’s not often that one gets to purchase their dream ride, especially when it’s a very specific custom truck that you’ve been drooling over for more than a decade! You’re kind of stuck unless the owner decides to sell, but how often does that happen considering it is probably their dream truck as well? Subscribe to our weekly newsletter Luckily for Ken Morse, patience and luck were in his favor when he was finally able to scoop up the ’91 Chevy S-10 Blazer you see here. Something Special Originally built by Ferlin York and his buddies over the course of several years, Ken had first come across the SUV in 2008 while it was still under construction. Having had a thing for S-10 Blazers since his younger years, Ken could see that the Chevy had the makings of something special. “I remember talking to my wife about the truck all the way back home, and how I couldn’t wait to see the end result,” he says. Ken lost sight of the Blazer for a while, wondering what had become of it. despite its clean and simple appearance, This S-10 Blazer sports many small details and one-off pieces that make it unique. “I didn’t really see any photos of the truck after that, and never heard much about the progress,” he says. “Then in 2016, I believe, I was at Slamfest and under the pavilion I saw this beautiful Blazer. After looking it over, I started talking to some guys and realized this was Ferlin’s truck—the same truck I had seen many years before with surface rust, no interior, and no engine at the time.” It really deserves to be seen and my son loves it, too, so I hope when he’s a bit older we can cruise together in it. DESPITE ITS CLEAN AND SIMPLE APPEARANCE, THIS S-10 BLAZER SPORTS MANY SMALL DETAILS AND ONE-OFF PIECES THAT MAKE IT UNIQUE. Being overwhelmed at the end result, Ken couldn’t believe the transformation and remained busy taking it all in. “Here I am at Slamfest, talking to Ferlin, and geeking out like a schoolgirl over his truck, realizing it looked even better than the vision I had made up in my head back then,” Ken says. Patience Pays Off Fast-forward a few years, and Ken had come close to closing the deal on a couple of S-10 Blazers that kind of reminded him of Ferlin’s Chevy, but the only problem was, they just weren’t Ferlin’s Chevy. Ken wondered if he wasn’t just being too picky, but then the fruits of his patience and focus would eventually pay off. Being overwhelmed at the end result, Ken couldn’t believe the transfor-mation and remained busy taking it all in. painted electric blue with silver pearl base, the S-10 has a shaved body, custom taillights, and a rebuilt 4.3L v-6 under the hood. “So, in 2021, I saw a post from someone in the mini-truck community stating that Ferlin was finally parting ways with his truck, and it was for sale,” Ken says. “I literally yelled at my wife and said, ‘babe remember Ferlin’s truck? It’s for sale!’” Before Ken could blink twice, he was typing away to reach Ferlin. “I messaged him so fast, it couldn’t have been more than 30 seconds after seeing the post,” Ken says. “We caught up on lost time and finally agreed to meet up to see the truck in person for the first time in a few years. It was everything I had remembered seeing at Slamfest, and we spent hours and hours catching up and made a deal.” The Little Things When we asked what was so special about this Blazer that no other would do, Ken says, “There are so many small details and one-off pieces on this truck, it really takes time to see and recognize them all. It’s clean and simplistic at first, but then you start to notice so many things that just aren’t there from the factory. It’s sometimes hard to believe that I own the truck I once saw as a project. To most people it’s just a bodydropped Blazer, but it means so much more to me.” inside, custom features include a wood bed floor, modified ’63 chevy c10 dashboard, and chevy cavalier leather bucket seats by innerworx. Ken is the first to share that he wasn’t the original builder of the truck, but his pride of ownership and sense of obligation to being the caretaker of the Blazer prove that Ferlin made the right choice in passing it on to him. As for what’s next, Ken does want to make a few changes as time goes on, not to change the Blazer’s history, but instead to add to it. “My plan with the truck is to get some exposure and make it my own as I go,” he says. “It really deserves to be seen and my son loves it, too, so I hope when he’s a bit older we can cruise together in it.” Will Ken’s son end up becoming its next caretaker? We guess we’ll just have to wait to find out! TECH SPECS Owner Ken Morse Deltona, FL 1991 Chevy S-10 Blazer Chassis & Suspension Step-notched frame Airbags with Accuair E-Level management Triangulated 4-link Thorbros upper and lower control arms Flush-mounted front shocks Wilwood brake master cylinder Hot rod style brake booster Rear disc brake conversion Custom fuel cell Wheels & Tires 20-inch Raceline Explosion 5 billet wheels 245/35R20 tires Engine & Drivetrain Rebuilt 4.3L V-6 March Performance billet pulley kit Edelbrock intake manifold and carburetor MSD ignition and HEI distributor Hedman long tube headers Custom 3-inch dual exhaust Built 700R4 transmission by Joe Sill Body & Paint Traditional body drop GMC Sonoma grille and billet insert Custom sectioned Chevy fullsize front bumper Shaved body Custom taillights in C-pillars Custom inner wheel wells Painted Electric Blue with Silver Pearl base by Joey Montague Interior & Stereo 1963 Chevy C10 dashboard modified to fit Custom metal door panel tops Custom interior handles Chevy Cavalier leather bucket seats by Innerworx Suede headliner Lokar floor shifter Dakota Digital gauges Wood bed floor
Best Wrench? Let’s Settle This! Snap On vs MAC Tools, Matco, Proto, SK, GearWrench, Kobalt, Husky 21 Wrenches: Snap On, SK Tools, MAC Tools, FACOM, Sunex, Gedore, Proto, Wright Tools, Matco, GearWrench, Williams, Klein Tools, Kobalt, Crescent, Tekton, Craftsman, Performance Tool, […] Adam Johnson July 18, 2022 Department Industry News Latest Press Release Product Reviews Profiles Uncategorized Videos
All The New Truck Parts from the ’21 SEMA Show With the absence of the world’s largest automotive aftermarket event from the 2020 calendar, the SEMA show finally made its grand return in 2021. With […] John Mata Jr. May 16, 2022 Department Industry News Latest Press Release Product Reviews Profiles Tech Uncategorized
Upgrades for Your GM C1500 Truck: Steering, Springs, Bedliners, and More The Right Hardware for Your Hauler ’88-’98 GM C1500 Power Rack and Pinion Cradle Kit The Flaming River power rack and pinion cradle kit replaces […] Brandon Burrell September 16, 2024 Department
Trick Transformation | Revamping an Older Chevy With a 7-Inch Lift and New Shoes Buying a new truck might sound tempting, but there are alternatives that can get you more for less. Sure, we’d all like a brand-new pickup, […] streettrucks May 17, 2021 Department How to Industry News Latest Product Reviews Profiles Reader Rides Tech Uncategorized