DYNAMIC F100 UNIBODY UNO | Father-Son Restos Build Memories

FATHERS TEACH A LOT TO their sons—when to throw a punch, how to hold their liquor, what to look for in used cars, when to change the oil in the ol’ truck—and sometimes, without even trying, they pass down the stuff that really matters.

A Tradition Rises

Our story begins with Jerry Bryant, the father in this dynamic unibody duo. He lives in Antelope, California, a cozy suburb of Sacramento’s Sierra Nevada foothills, and works as an acoustical ceiling installer. More than 30 years ago, he found himself coveting a friend’s 1963 F-100 Unibody with a big wraparound back window, and he had to have one for himself.

The best part of the buildup was enjoying the time with my dad, grandpa and uncle, building it when I was a teenager.
—Jake Bryant

“I really liked the look of it,” Jerry shared. “So, I found one and got to work on it.”

And work on it he did.

This Unibody’s powerplant is a 1971 Ford V-8 built by Parrish Engines of Sacramento. The 351 Windsor features hypereutectic pistons with a 9:1 compression ratio, an Edelbrock RPM camshaft and intake manifold, Holley Street Avenger carburetor, Hedman Headers exiting through a Flowmaster 2.5-inch exhaust. With a nod to L&L Transmission of Sacramento, the truck’s transmission is a 1979 Ford c6 with a B&M Shifter. Its custom torque converter is a TCI Saturday Night Special with a stall speed of 2500.

The driveshaft, brakes and master cylinder come from a 1979 F-100, and the rear axles via an F-100 9-inch. Other drivetrain mods include Dutchman 31 spline axles.

Jerry modified the chassis and frame himself. He used a 1965 F-100 as its base, and added ’79 F-100 radius arms, front springs and steering box. It rides on Wheel Vintique’s 15×7- and 15×8-inch wheels wrapped in Cooper Cobra tires. Inside, Jerry’s Unibody is decked out in green and blue vintage tweed on a bench seat from a 1992 Chevy 1500, thanks to the work of Kenny Brazelton of Colfax, California. The gauges and instruments are stock 1963, except for the stereo, which has been converted to an MP3 player.

The F-100’s custom bodywork—including shaved bed pockets and body seams—sets off the stock grille and bumpers. The pinstriping was done by Poor Boy Lefty from Sacramento. But the real showstopper is the stock Caribbean Green with a metal flake base coat and clear coat, which was painted by Jerry’s son, Jake.

“The Roth Metal Flake paint job is the truck’s most unique feature,” Jerry says.

The only thing he’d change on it is the engine. “One of these days, I’m going to put in the 460 Ford I have waiting,” Jerry says. “If I were to build something like this again, I’d start with a stock, rust-free truck, because this one had lots of rust. And trim parts are impossible to find!”

Jerry notes his main challenge in this build was time and money. “I wanted to put my family first, to be a dad first,” he says. “And then find time for my toys.”

Next Generation Begins

While Jerry’s Big Back Window Unibody slowly came together, he and his wife, Rebecca, had a son named Jacob—Jake for short. For Jake’s 15th birthday, his truck-loving pop bought him a 1961 F-100 Unibody.

“He wanted mine to match his,” Jake says. “And it took me two years on the full to build, plus 20 years of changes and upgrades. There’s a reason why I became a mechanic by trade!”

Evenings, weekends and any time they could get, Jake, his dad, grandfather and uncle worked on the kid’s ’61 Unibody. The elder Bryants passed their knowledge and wisdom to Jake—and it’s something he says he’ll never forget.

“The best part of the buildup was enjoying the time with my dad, grandpa and uncle, building it when I was a teenager,” Jake says. “I learned everything from them! I was a young kid, and the entire thing, the whole time, was a learning experience for me.”

More than $50,000 and 20 years later, Jake and his wife, Ashley, who now make their home in North Highlands, California, have a sweet classic cruiser.

The engine, built by Jake and his pal Rick George, is a 1974 Chevy Big Block V-8, 454 .40 over. It features SRP pistons with a 10.5:1 compression ratio, steel crank and ARP bolts, a Big Mother Thumper roller and an Edelbrock intake manifold. The carburetor is a Demon 750cc, headers are by Patriot, and the exhaust system is a 3-inch Flowmaster that exits at the rear axle. Other engine mods include a high floor T start/pump, high-performance power steering pump and a high-volume fuel pump.

Evenings, weekends and any time they could get, Jake, his dad, grandfather and uncle worked on the kid’s ’61 Unibody.

L&L Transmission prepped a 1990 Chevy 4L 80E transmission for Jake’s Unibody as well. Mods include a manual valve body and 3500 lock up stall converter. The trans cooler and shift kit are by B&M, and the shifter is from Lokar. Jake installed a custom torque from PDQ Torque Converters in Sacramento. To bring the truck to a stop, Jake installed 1976 Camaro brakes on the front and 1963 F-100 brakes on the rear, along with a 1979 Ford F-100 Master Booster master cylinder.

With the help of uncle Clyde Brown, Jake’s F-100 frame is a 1958 Chevy with a 1976 Camaro Clip. The front springs are stock from a 1976 Camaro, and the rear sports a CCP axle flip/lowering kit. Both the rear springs and shocks are from Summit Racing and the truck rides on Vintage 15×6 and 15×8 wheels wrapped in BFG tires.

Inside the cab, Jake used Autometer instruments and gauges. He custom built the cluster out of two stock panels to fit all four small gauges next to a 150 speedometer. He also included a red flake steering wheel.

The ’61’s custom bodywork includes shaved bed pockets, shaved cowl vent and Frenched antenna, along with a stock grille and stock bumpers. The paint—Black and clear—was done by Jake, Poor Boy Lefty did the pinstriping, and Eric Foust hand painted the door logo in red, white and silver.

“It had lots of rust to repair, so I had to wait for my paycheck to buy parts,” Jake recalls with a laugh. “But I bought a clean 1963 F-100 and cut it apart for patch panels.”

The changes Jake plans to make include a four-link and an interior re-do. “The interior is about 15 years old, and it’s time,” he says.

Family Bonding

Jerry and Jake, both members of the Alley Cats Carclub in Sacramento, attend the same events, including All Cats’ Night of Revving Dead show, Sacramento Poor Boys Midnight Mass, Summit Racing Show and Viva Las Vegas.

They’ve bonded over their trucks, just as Jerry had envisioned decades ago.

But besides passing down an appreciation for F-100s and custom trucks, Jerry passed down something even more important—an appreciation for family.

“If I had to give advice to someone thinking of building a similar truck, do it!” Jake says. “It’s a great experience and a fun family-bonding experience. I built this truck at home, in the garage, with the help of my family.”

That’s something he’ll remember forever, and maybe even pass down to the next generation.

[divider]TECH SPECS “FATHER”[/divider]

JERRY BRYANT
1963 F-100 Unibody, Big Back Window
Antelope, California

EXTERIOR

• Stock grille
• Stock bumpers
• Custom bodywork: Shaved bed pockets, body seams
• Paint: Stock Caribbean Green covered in both flake base coat and clear coat
• Painter: Jake Bryant (son) of Sacramento
• Graphics: Pinstripe by Poor Boy Lefty from Sacramento

ENGINE

• 1971 Ford V-8
• Displacement: 351 Windsor
• Engine buildup/mods: Parrish Engines, Sacramento
• Connecting rods: Stock, rebuild mild cam
• Pistons: Hypereutectic pistons
• Compression ratio: 9:1
• Camshaft: Edelbrock RPM
• Lift: 496/520
• Duration: 224/234 @ 50
• Head mods: Ported to match Ford lightning specs
• Intake manifold: Edelbrock
• Carburetor: Holley, Street Avenger, 670 CFM
• Headers: Hedman
• Exhaust: Flowmaster
• Exhaust diameter: 2½ inches; location: rear
• Ignition: Summit racing
• Other engine mods: Roller Rockers

DRIVETRAIN

• Transmission: Ford 6-6 1979
• Trans mods: B&M Shift
• Shift kit: B&M
• Shifter: B&M
• Custom torque converter: TCI Saturday Night Special
• Stall speed: 2500
• Transmission cooler: B&M
• Trans work done by L&L Transmission of Sacramento
• Driveshaft/U-joint mods: Stock 1979 / New Spicer Joints
• Rear drive axle: 1963 F-100 9-inch
• Axle ratio (rear): 3:25
• Limited slip or locker: Eaton Posi
• Other srivetrain mods: Dutchman 31 spline aides
• Brakes: 1979 F-100 disc brakes
• Master cylinder: 1979 F-100
• Other brake mods: 8-inch mini booster

CHASSIS

• Frame make/year: Ford 1965
• Frame mods: 1979 F-100 Radio arms / disc brake balled on drop springs in the rear
• Front springs: Stock 1979 F-100
• Rear springs: DJM Drop brackets/ shackles
• Frame mods done by Jerry
• Suspension components installed by Jerry
• Steering box: 1979 F-100
• Tires: Cooper Cobra
• Sidewall: Shovel sidewall
• Wheels: Wheel vintique 15×7, 15×8
• Fuel tank: CCP rear frame mount
• Other chassis notes: Moved front cab mounts to fit 1963 body to ’65 frame

INTERIOR

• Bench 1992 Chevy 1500
• Upholstery: Vintage / tweed
• Color: Green/blue
• Done by Kenny Brazelton of Colfax, California
• Gauges: Stock 1963
• Steering wheel: Grant
• Stereo: Stock / converted to mp3

[divider]TECH SPECS “SON”[/divider]

JACOB “JAKE” BRYANT
1961 F-100 Unibody
North Highlands, California

EXTERIOR:

• Stock grille
• Stock bumpers, replacement from LMC
• Shaved bed pockets, shaved cowl vent, Frenched antenna

PAINT:

• Black and clear painted by Jake
• Black Valspar base coat, clear coat, one shot for door logos and pinstriping
• Poor Boy Lefty of Sacramento did the pinstriping
• Eric Foust hand painted the door logo in red, white and silver

ENGINE:

• 1974 Chevy Big Block V-8, 454 .40 over
• Parts needed to install: Build crossmembers and mounts
• Engine buildup/mods done by Jake and Rick George
• Eagle brand connecting rods
• Pistons: SRP, 10.5:1
• Steel crank, Arp bolts
• Camshaft: Comp cam; model: Big Mother Thumper roller
• Lift: I: .570; E: .554
• Duration: .050 243/257 107 Lobe separation
• Head modifications: Stock
• Intake manifold: Edelbrock; model: RPM Air Gap
• Carburation: Demon 750 CC
• Headers: Patriot; side: ¾ length, 2” tube to 3” exhaust
• Exhaust system: Flowmaster muffler
• Exhaust diameter: 3”, exit location of exhaust is rear axle
• Ignition: MSD
• Other engine mods: High floor T start/pump, high performance power steering pump, high volume fuel pump

DRIVETRAIN

• Transmission: 1990 Chevy 4L 80E
• Parts to install trans swap: Build a crossmember / make driveline
• Trans mods: Manual valve body, 3500 lock up stall converter
• Shift kit: B&M; shifter: Lokar
• Custom torque: PDQ torque converters in Sacramento; stall speed 3500
• Trans cooler: B&M
• Trans work done by L&L Transmission in Sacramento
• Driveshaft, U-Joint mods: 1350 Spicer Solid Joints
• Rear drive axle: 1963 F-100 9-inch Ford
• Axle ratios: Rear 3:73
• Limited slip or locker: Eaton Posi
• Other drivetrain mods: Moser 31 spline
• Brakes: Front: 1976 Camero; rear: 1963 F-100
• Master cylinder: 1979 Ford F-100 Master Booster
• Other brake mods: Line locks and vacuum pump

CHASSIS

• Frame: Chevy 1958 / 1976 Camaro Clip
• Frame mods: Camaro subframe / 1958 truck with CCP lower kit
• Front springs: Stock 76 Camaro
• Front shocks: Summit Racing
• Rear springs: CCP Axle flip kit
• Rear shocks: Summit
• Frame mods done by Clyde Brown (uncle) and Jake, both of Sacramento
• Suspension Components installed by Jake
• Steering box: CCP Close Ratio
• Tires: BFG
• Backspacing: (front/inches): Stock Chevy Cam / 6” rims (rear/inches): 3 ¾ backspace on 8” rims
• Wheels: Vintage
• Wheels (model) Chrome Reverse
• Wheels (size) 15×6, 15×8
• Fuel tank: CCP Rear mount conversion for 1958 Chevy 20 gallon

INTERIOR

• Instrumentation/gauges: Autometer
• Steering wheel: Red flake
• Unique features: Custom built cluster out of two stock panels, to fit all four small gauges next to 160 speedometer