New Parts Counter | Gear For Your Ride

The Right Hardware for Your Hauler

CONTROL THE FLOW

AEROMOTIVE INTRODUCES NEW VARIABLE SPEED CONTROLLED PUMPS AND CONTROLLER, ALLOWING FOR THE USE OF LARGER, HIGHER-HORSEPOWER FUEL PUMPS IN STREET APPLICATIONS. Reducing fuel flow from the tank to the engine and back helps combat overheating of the fuel while limiting the noise bigger pumps produce. The lower fuel flow will also extend the already long life of Aeromotive’s brushless pumps.

AEROMOTIVE
www.aeromotiveinc.com 
913-647-7300

’63-’70 CHEVY & GMC C20 DISC BRAKE CONVERSION

WESTERN CHASSIS RELEASED AN ALL NEW DISC BRAKE CONVERSION KIT FOR YOUR 1963-70 CHEVY AND GMC C20 TRUCK. In the kit you will receive all the items needed to convert your vintage truck to disc brakes at the wheels. These conversion kits include 2.5-inch drop or stock height spindles, eight-lug rotors and late-model ball joints and tie rod ends. These disc brake systems not only upgrade your truck to disc brakes, but they use 1971-87 ball joints and tie rod ends making future replacements a snap.

WESTERN CHASSIS
www.westernchassisInc.com
866-720-0929

QA1 FOR 1973-87 CHEVY C10

THE ULTIMATE SUSPENSION SOLUTION FOR ’73-’87 CHEVY C10 SQUARE BODIES. With both the front and rear systems in use, these kits allow you to lower all four corners and have 4-7 inches of ride height adjustability. The rear system consists of five individual components: the panhard bar, torque arm, trailing arms, bracket mounts, and shocks.

QA1
www.qa1.net
800-721-7761

SILVERADO SWAY BARS

HELLWIG PRODUCTS INTRODUCES NEW BOLT-ON, adjustable rear sway bar for the 2019 Chevrolet Silverado 1500 and GMC Sierra 1500 that drastically reduces lateral sway and offers more driver control.

HELLWIG PRODUCTS
www.hellwigproducts.com
800-435-5944

C10 MUSCLEBAR RIDETECH OFFERS A HIGH-TECH CNC TUBING BENDER THAT ACCURATELY FORMS EACH SWAY BAR. All-new investment cast bar ends promote engagement between the sway bar itself and end links. Ridetech MUSCLEbars feature self-lubricating, Delrin-lined bushings. They are far superior to bind-prone and squeak-prone poly frame bushings.

RIDETECH
www.ridetech.com
812-481-4787

ONE-PIECE INNER FENDERS

VANNATTA FABRICATION IS KNOW FOR BUILDING BADASS TRUCKS, BUT NOW THE COMPANY OFFERS SOME TRICK SHEETMETAL PRODUCTS FOR C10 TRUCK GUYS. These ’67-’72 one-piece inner fender wells can be made in aluminum or steel with hinge cutouts, bed-rolled design and dimple dies.

VANNATTA FABRICATION
www.vannattafabrication.com
660-619-0158

DASHING!

TAKE THE INTERIOR OF YOUR 47-53 CHEVROLET/ GMC ADVANCE DESIGN TRUCK TO THE NEXT LEVEL WITH THESE LS FABRICATION DASH PIECES. CNC machined from 6061 aluminum, they come with all the stainless-steel hardware required to properly install.

LS FAB
www.lsfab.ca
780-678-9469